Upgrade Firmware; Save/Load - Digitron EX-9486-W Operation Manual

Upgrade Firmware

You can contact with your vendor for upgrading the latest version
firmware of device.
To update firmware of the device, save the firmware file in your host
PC from vendor. Go to "Configuration", and "Update Firmware".
Specify the file location by Browsing and continue operation by
Update. The device will reboot after firmware updating and be
located again in EXTool's "Device List" item.
Note:
All parameters will restore to default after the firmware update,
except for the device IP address.

Save/Load

After finishing setup, be sure to click "Apply and Save" button.
24