Table of Contents
Advertisement
Serial-Server is providing new ways of connecting legacy serial converter devices to
a Local Area Network (LAN) or Wide Area Network (WAN). EX-9486-W is designed
to operate serial ports through wireless(Wi-Fi 802.11b & g) or entity line(RJ-45 cable)
over 100Mbit/s Ethernet networks. The data is transmitted via TCP/IP protocol.
Therefore control is available via Ethernet, Intranet and Internet. EX-9486-W is
packaged in a case well suited for industrial environments. All serial ports operate in
common RS-232 mode , industrial RS-422 and RS-485 modes configuration.
EX-9486-W is a low-cost, high performance design. By careful selecting high quality
with competitive prices components in the world, products made network
connectivity possible with affordable cost for virtually all kinds of devices.
The EX-9486-W can connect the Remote I/O Control module of EX9000 Series for
EX9000 Series to Wireless by RS-232/422/485. This operation manual will guide you
step by step for the various functions of the EX-9486-W.
The following topics are covered in this chapter:
O verview
P ackage Checklist
B lock Diagram
P roduct Features
P roduct Specifications
3
Introduction
1
1
Advertisement
Table of Contents
