Table of Contents
Advertisement
Terminator
The purpose is for compensating signal attenuation in long distance
connection at RS-485/RS-422 I/O. If the switch 1 & 2 are set in "ON"
position, the signal compensation will be activated. To disable the function,
just push switch 1 & 2 to opposite position.
LED Indicators?
SYS (Red)：
Power indicator (When the power is on, the LED will blink once per second.)
LAN (Green)：
Network signal indicator (When the LAN signal is detected, the LED will be
on.)
TX (Red)：
Data sent indicator (When data are sent out to the network, the LED will be
on.)
RX (Green)：
Data received indicator (When data are received from the network, the LED
will be on.)
14
Advertisement
Table of Contents
