Yamaha TRACER MT09TRA Owner's Manual page 56

For your safety – pre-operation checks
ITEM
1
2
Rear brake
3
4
Clutch
5
Throttle grip
6
Control cables
7
Drive chain
8
Wheels and tires
9
Brake and shift pedals
10
Brake and clutch levers
11
Centerstand, sidestand
Chassis fasteners
12
• Check operation.
• If soft or spongy, have Yamaha dealer bleed hydraulic system.
• Check brake pads for wear.
• Replace if necessary.
• Check fluid level in reservoir.
• If necessary, add specified brake fluid to specified level.
• Check hydraulic system for leakage.
• Check operation.
• Lubricate cable if necessary.
• Check lever free play.
• Adjust if necessary.
• Make sure that operation is smooth.
• Check throttle grip free play.
• If necessary, have Yamaha dealer adjust throttle grip free play and lubricate cable
and grip housing.
• Make sure that operation is smooth.
• Lubricate if necessary.
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate pivots if necessary.
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
CHECKS
4-2
PAGE
6-22, 6-23
6-21
6-17, 6-27
6-27
6-25, 6-26
6-18, 6-20
6-28
6-28
6-29
—