Removing And Installing The Panel - Yamaha TRACER MT09TRA Owner's Manual

Hide thumbs Also See for TRACER MT09TRA:
Table of Contents

Advertisement

Periodic maintenance and adjustment
1
Removing and installing the
panel
2
The panel shown needs to be removed
to perform some of the maintenance
jobs described in this chapter. Refer to
3
this section each time the panel needs
to be removed and installed.
4
5
6
7
8
1. Panel A
9
10
Panel A
11
To remove the panel
1. Remove
the
12
screws, and then pull the panel
outward and slide it downward as
EAU18752
shown.
1
1. Quick fastener screw
1
EAU63101
1. Panel A
2. Quick fastener screw
2. Disconnect the turn signal light
quick
fastener
lead coupler.
2
1
6-9
1. Turn signal light lead coupler
To install the panel
1. Connect the turn signal light lead
coupler.
2. Place the panel in the original posi-
tion, and then install the quick fas-
tener screws.
1

Advertisement

Table of Contents
loading

Table of Contents