Yamaha TRACER MT09TRA Owner's Manual page 28

Instrument and control functions
This mode allows you to set, select, or
1
reset the items shown in the informa-
tion display.
2
TIP

The transmission must be in neu-
3
tral and the vehicle must be
stopped to change settings in this
4
mode.

Shifting the transmission into gear
or turning the key to "OFF" will exit
5
the setting mode and all changes
will be saved.
6
Push and hold the menu switch
"MENU" for 2 seconds to enter the set-
7
ting mode. To exit the setting mode and
return to the normal display, push and
8
hold the menu switch again for 2 sec-
onds.
Display
9
This function allows you to
check and reset the "OIL"
10 oil change interval
(distance traveled), and
Maintenance
the "FREE-1" and
"FREE-2" maintenance
11
intervals.
12
Time Trip
Unit
Description
Display
Brightness
Clock
All Reset
This function allows you to
check and reset the
"TIME–2" and "TIME–3"
functions. These time trips
show the total elapsed
time that the key has been
in the "ON" position. When
the key is turned to "OFF",
the time trips stop counting
but are not reset. The
maximum time that can be
shown is 99:59.
When the time trips reach
100 hours, they
automatically reset to 0:00
and continue counting.
This function allows you to
switch the display units
between kilometers and
miles. When kilometers are
selected, the fuel
consumption units can be
switched between
"L/100km" and "km/L".
This function allows you to
change the items shown in
3 information displays.
This function allows you to
adjust the brightness of the
multi-function meter unit
panel.
This function allows you to
set the clock.
This function allows you to
reset all items, except the
odometer and the clock.
3-13
Resetting the maintenance counters
1. Use the select switch to highlight
"Maintenance".
MENU
Maintenance
Time Trip
Unit
Display
Brightness
Clock
All Reset
2. Push the menu switch, and then
push the "RESET" button to select
the item to reset.
Maintenance
OIL km
20
FREE-1 km
10
FREE-2 km
10
3. While the selected item is flashing,
push the "RESET" button for 2
seconds.