Before You Begin - Planet Networking & Communication MH-5000 Quick Installation Manual

Before You Begin

It's best to use a computer with an Ethernet adapter for configuring the MH-5000.
The default IP address for the MH-5000 is 192.168.1.254 (LAN1 at the port number
4) with a Subnet Mask of 255.255.255.0. You will need to assign your computer a
Static IP address within the same range as the MH-5000's IP address, say
192.168.1.2 to configure the MH-5000.
Device default value
You should have an Internet account already set up and have been given most of
the following information as the following table. Fill out this table when you edit the
web configuration of MH-5000.
Password:
Fixed IP
WAN1
(Port 1)
PPPoE
DHCP
Fixed IP
WAN2
(Port 2)
PPPoE
DHCP
DMZ1(Port 3)
LAN1(Port 4)
LAN2(Port 5)
Items
IP Address
Subnet Mask
Gateway IP
Primary DNS
Secondary DNS
PPPoE Username
PPPoE Password
IP Address
Subnet Mask
Gateway IP
Primary DNS
Secondary DNS
PPPoE Username
PPPoE Password
IP Address
IP Subnet Mask
IP Address
IP Subnet Mask
IP Address
IP Subnet Mask
Default value
admin
Not initialized
Not initialized
10.1.1.254
255.255.255.0
192.168.1.254
255.255.255.0
192.168.2.254
255.255.255.0
New value
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
____.____.____.____
2