Planet Networking & Communication MH-5000 Quick Installation Manual page 11

3. PPPoE
If your ISP uses Point-to-Point Protocol over Ethernet (PPPoE), choose this option.
When this option is chosen, the following fields appear to allow you to enter the
related account information.
IP Address
Assignment
Get IP
Automatically
(DHCP)
FIELD
Default WAN
link
(Gateway/DNS)
Get DNS
Automaticaslly
or DNS IP
Address
Routing
Protocol
OSPF Area ID
DESCRIPTION
When Default WAN link is enabled.
All the packets sent out from MH-5000
will be via this port.
Get DNS Automatically à Get DNS
related information from DHCP Server
DNS IP Address à manually specify
these Primary and Secondary DNS
Server information
Determine to enable the dynamic
routing protocol, to receive RIP
message, to send out the RIP message if
the RIP message is received or not.
Specify OSPF area ID number
11