Planet Networking & Communication MH-5000 Quick Installation Manual page 16

FIELD
IP Address
IP Subnet
Mask
Enable DHCP
Server
IP Pool
Starting
Address
Pool Size
(max
size: 253)
Primary DNS
Server
Secondary
DNS Server
Lease time(sec)
Routing
Protocol
OSPF Area ID
DESCRIPTION
DMZ port IP address
DMZ port IP subnet mask
Enable DMZ port of the
DHCP Sever or not
Specify the starting address
of the DHCP IP address.
Specify the numbers of the
DHCP IP address.
Specify the Primary DNS
Server IP address of the
DHCP information.
Specify the Secondary
DNS Server IP address of
the DHCP information.
Specify DHCP information
lease time
Determine to enable the
dynamic routing protocol
(RIP), to receive RIP
message, to send out RIP
message if the message is
received or not.
Specify OSPF area ID
number
Range / Limitation
IPv4 format
netmask format
Enable/Disable
IPv4 format in the DMZ
address range
1 ~253
IPv4 format
IPv4 format
greater than 0
None / RIPv1In /
RIPv1In+out / RIPv2In /
RIPv2In+out / OSPF
IPv4 format or digital string
(Max 9 bits)
16