Devices with A2DP Bluetooth can use the NB-200 to play music and receive calls. Devices without A2DP cannot play music through the NB-200; it can only use the NB-200 as a Speaker phone. Other non Bluetooth devices can be connected using the supplied 3.5mm Stereo Line-in cable. Further instructions on Bluetooth connectivity can be found in the user guide for your A2DP Bluetooth device.
The NB-200 has a built in rechargeable li-on battery, you can connecting the USB charge cable to an available USB port (PC/Mac or USB Power Adapter). Once the NB-200 is fully charged, the LED will revert back to the previous LED status (i.e. if the speaker was in a playing status during charging, the LED will illuminate BLUE) The Bluetooth speaker can also be used when the unit is recharging.
Page 4
Activate your Bluetooth device to the Searching mode (new device searching) Press and hold the ‘Play/Pause’ button on the front of the NB-200 until the Red/Blue LED starts flashing on front of NB-200. (NB-200 will have 3minutes to connect/pair with your Bluetooth).
Page 5
Battery fully recharged – (LED will revert back to the previous LED status) Set up of Aux In The NB-200 also offers the ability to allow other portable audio devices such as iPod shuffle, MP3, Mini Disc and Portable CD Players to be connected for use as a speaker system.
(Paring the NB-200 with a Bluetooth Device (First time connection) I cannot find my ‘NB-200’ Ensure your NB-200 is not already connected to another device, the Bluetooth on my Bluetooth device Speaker can only connect to 1 device at any 1 time.
Page 7
www.3nod.com.cn Shenzhen 3NOD Electronics Co., Ltd user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the NB-200 and is the answer not in the manual?
Questions and answers