Nyne Aqua Quick User Manual

Aqua
LT Garsiakalbio vartotojo vadovas
PL Przenośnego głośnika
Bluetooth
RO Difuzor portabil Bluetooth
SK Prenosného
reproduktoraBluetooth
LT Sutrumpintas nešiojamojo
bluetooth
PL Skrócony Przewodnik
Użytkownika
RO Ghid de referinţă rapidă
SK Stručná príručka užívateľa
nyne.com
2
1
Press and hold
indicator flashes blue.
+ For first-time use, the Bluetooth indicator
flashes blue quickly, indicating that
the speaker is in pairing mode.
Charge the speaker until the red
Tip:
power indicator turns off.
again after Bluetooth setup, the speaker
Tip:
will search for the paired device and the
If the power indicator flashes red
Bluetooth indicator will flash slowly. If no
quickly, it indicates that the battery
paired device is found, it will flash quickly
is low and needs to be recharged.
and the speaker will enter pairing mode.
until the Bluetooth
When you power on the speaker
1
Make sure that the speaker is in pairing mode.
2
Enable Bluetooth on your device to
be paired with the speaker.
NYNE AQUA 3
Select 'NYNE AQUA' from the available devices
(enter the password '0000' if necessary) to start
pairing and connection with the speaker.
4
After successful connection, the Bluetooth
indicator turns solid blue and the speaker beeps.
Tip:
This speaker supports automatic
connection with a previously paired device
after power-off and power-on again.
You can press and hold for more
than 2 seconds to enter manual pairing
mode. In this way, you can pair the
speaker with a new Bluetooth device.
You can press and hold both +/- for more than
5 seconds to clear all paired Bluetooth devices.
This speaker is compatible with the voice
assistant on your smart device.