Nyne Mini - Portable Bluetooth Speaker Manual

Nyne Mini - Portable Bluetooth Speaker Manual

Advertisement

Nyne Mini - Portable Bluetooth Speaker Manual

What's in the box

Charging

Charging
Charge the speaker until the indicator turns from white to green.
Tip: If the Bluetooth indicator flashes red slowly, it indicates that the battery is low and needs to be recharged.

Turn on/off

Turn on/off
Slide the power switch to the ON position.
For first-time use, the Bluetooth indicator flashes blue quickly, indicating that the speaker is in pairing mode.
Tips: When you power on the speaker again after Bluetooth setup, the speaker will search for the paired device and the Bluetooth indicator will flash slowly. If no paired device is found, it will flash quickly and the speaker will enter pairing mode.
You can slide the power switch to the OFF position to power off.
If the speaker does not turn on after you slide the power switch to the ON position, try to power off and then power on the speaker again.
To save power, the speaker turns off automatically after 30 minutes of inactivity.

Connection

Connection

  1. Connect an auxiliary audio device to the speaker through the supplied 3.5mm audio cable.
  2. Play and control music on the audio device, and use +/- on the speaker to adjust volume if necessary.

Tip: When the 3.5mm audio cable is plugged in, the speaker switches to AUX IN mode automatically. When it is unplugged, the speaker switches back to Bluetooth mode and connects with the previously paired device automatically. If no device is available, the speaker enters pairing mode.

Pairing

Pairing

  1. Make sure that the speaker is in pairing mode.
  2. Enable Bluetooth on your device to be paired with the speaker.
  3. Select 'Nyne Mini' from the available devices (enter the password '0000' if necessary) to start pairing and connection with the speaker.
  4. After successful connection, the Bluetooth indicator turns solid blue and the speaker beeps.

Tips: This speaker supports automatic connection with a previously paired device after power-off and power-on again.
You can press and hold for more than 2 seconds to enter manual pairing mode. In this way, you can pair the speaker with a new Bluetooth device.
You can press and hold both +/- for more than 10 seconds to clear all paired Bluetooth devices.
This speaker is compatible with the voice assistant on your smart device.

Play music

Play music
Play music on your device paired and connected with the speaker.
During music play:

  • Press +/- to adjust volume.
  • Press and hold +/- to skip to the previous or next song.
  • Press to pause or resume music play.
    When you make a call or there is an incoming call, you can use the speaker as a speaker phone.
  • When there is an incoming call, you can press to receive the call.
  • During a call, you can press to end the call.
  • You can press on the speaker twice to access the voice assistant on your smart device.

Tips: Music play is paused during a call and resumed automatically when the call ends.
You can press and hold to disconnect the current Bluetooth connection.

All registered and unregistered trademarks are property of their respective owners.
Nyne Multimedia Inc. All rights reserved.

nyne.com

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Nyne Mini - Portable Bluetooth Speaker Manual

Advertisement

Need help?

Need help?

Do you have a question about the Mini and is the answer not in the manual?

Questions and answers

Table of Contents