Step
Enter system view.
1.
Enter BGP view.
2.
Enter IPv6 address family
3.
view.
Configure the IPv6 MCE as
4.
the EBGP peer.
Redistribute the IGP routes
5.
of the VPN.
Configuring routing between IPv6 MCE and PE
IPv6 MCE-PE routing configuration includes these tasks:
•
Bind the IPv6 MCE-PE interfaces to IPv6 VPN instances
•
Perform routing configurations
•
Redistribute IPv6 VPN routes into the routing protocol running between the IPv6 MCE and the
PE.
Configuring IPv6 static routing between IPv6 MCE and PE
Step
Enter system view.
1.
Configure IPv6
2.
static routes for an
IPv6 VPN instance.
Configuring RIPng between IPv6 MCE and PE
Step
Enter system view.
1.
Create a RIPng process
2.
for an IPv6 VPN instance
and enter RIPng view.
Command
system-view
bgp as-number
ipv6-family
peer ipv6-address as-number
as-number
import-route protocol
[ process-id [ med med-value |
route-policy route-policy-name ]
* ]
Command
system-view
ipv6 route-static ipv6-address prefix-length
•
{ interface-type interface-number
[ next-hop-address ] | next-hop-address |
vpn-instance d-vpn-instance-name
nexthop-address } [ preference preference-value ]
[ tag tag-value ] [ description description-text ]
ipv6 route-static vpn-instance
•
s-vpn-instance-name&<1-6> ipv6-address
prefix-length { interface-type interface-number
[ next-hop-address ] | nexthop-address [ public ] |
vpn-instance d-vpn-instance-name
nexthop-address } [ preference preference-value ]
[ tag tag-value ] [ description description-text ]
Command
system-view
ripng [ process-id ] vpn-instance
vpn-instance-name
41
Remarks
N/A
N/A
N/A
N/A
Optional.
By default, no route redistribution
is configured.
A VPN site must advertise the
IPv6 VPN network addresses it
can reach to the connected IPv6
MCE.
Remarks
N/A
User either
command.
Remarks
N/A
N/A