HPE 5820X Series Configuration Manual page 50

Step
Redistribute the VPN
3.
routes.
Configure the default cost
4.
value for the redistributed
routes.
Return to system view.
5.
Enter interface view.
6.
Enable the RIPng
7.
process on the interface.
Configuring OSPFv3 between IPv6 MCE and PE
Step
Enter system view.
1.
Create an OSPFv3
2.
process for an IPv6 VPN
instance and enter
OSPFv3 view.
Set the router ID.
3.
Redistribute the VPN
4.
routes.
Configure a filtering
5.
policy to filter the
redistributed routes.
Return to system view.
6.
Enter interface view.
7.
Enable the OSPFv3
8.
process on the interface.
Configuring IPv6 IS-IS between IPv6 MCE and PE
Step
Enter system view.
1.
Create an IS-IS
2.
process for an IPv6
VPN instance and
enter IS-IS view.
Configure a network
3.
entity title.
Enable the IPv6
4.
capacity for the IS-IS
process.
Command
import-route protocol [ process-id ]
[ allow-ibgp ] [ cost cost | route-policy
route-policy-name ] *
default cost value
quit
interface interface-type interface-number
ripng process-id enable
Command
system-view
ospfv3 [ process-id ] vpn-instance
vpn-instance-name
router-id router-id
import-route protocol [ process-id |
allow-ibgp ] [ cost value |
route-policy route-policy-name | type
type ] *
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name } export
[ bgp4+ | direct | isisv6 process-id |
ospfv3 process-id | ripng process-id |
static ]
quit
interface interface-type
interface-number
ospfv3 process-id area area-id
[ instance instance-id ]
Command
system-view
isis [ process-id ] vpn-instance
vpn-instance-name
network-entity net
ipv6 enable
42
Remarks
By default, no route of any
other routing protocol is
redistributed into RIPng.
Optional.
0 by default.
N/A
N/A
Disabled by default.
Remarks
N/A
N/A
N/A
By default, no route of any other
routing protocol is redistributed
into OSPFv3.
Optional.
By default, redistributed routes
are not filtered.
N/A
N/A
Disabled by default.
Remarks
N/A
N/A
Not configured by default.
Disabled by default.