Table of Contents
Advertisement
Appendix A - PC600
Series WAN
Installation
These instructions identify the steps to configure the terminal to
communicate with the PayClock database server across the internet.
A print out of the "Server Summary" information is required for this
set up. If the information was not printed during the PayClock
software installation, follow these steps to access the information.
•
At the computer where the PayClock database server
resides, open the PayClock software.
•
Click the PayClock orb on the upper left and from the menu,
select Support Assistant.
•
In the Support Assistant window, select Connection Info.
•
Print the Connection_Info.txt file for use when configuring
the terminal.
WAN Installation Requirements
•
There must be a VPN tunnel connecting the local and
remote sites. Note: A software based VPN is not supported.
A hardware based VPN is required!
•
A static IP address is required on the computer designated
as the PayClock database server.
•
A network administrator may be required to configure the
network routers to route the ports used by the terminal and
PayClock database server.
Important Port Information - The following ports are used for this
type of installation.
•
7350 - PayClock Network Terminal Service
•
7351 - Auto Poll Service
Appendix A - PC600 Series WAN Installation • 45
Hide quick links:
Advertisement
Table of Contents
