Table of Contents
Advertisement
•
Select the Enabled Hosted Mode option. This will dim the
Device IP Address field since it isn't used when operating
the terminal in hosted mode.
•
Click Save.
Step 2 - Connect the Terminal to PayClock
Online
The PC600 series terminal must be added to PayClock Online
before attempting this step. The terminal must be powered up and
connected to the network with access to the internet.
•
At the PC600 press the Admin button. Enter the
administrator PIN and press Enter.
•
From the Administrator Main Menu press Network Setup.
•
Press Define Host. The Select Connection Method screen
will display.
•
Press Hosted.
•
Press Yes to confirm using the Hosted option.
•
Press Connect. The terminal will connect over the internet
to PayClock Online.
•
After connecting the data will be downloaded to the terminal
and it will be ready for use.
•
When complete a green icon
display identifying it is to the internet.
•
The terminal will be operational and ready for use.
Changing settings at the Terminal
The default settings that can be changed by the administrator at the
terminal or the PayClock Online software are:
•
Time Zone: The time zone is set to Eastern Time.
8 • PayClock Online
will show on the terminal's
Hide quick links:
Advertisement
Table of Contents
