Table of Contents
Advertisement
Activating Live Sync at the
Terminal
A PC600 series terminal running in "Live Sync" mode doesn't have to
be polled or updated. Punches are automatically added to the
database. Any changes will be detected and the terminal will
automatically update itself.
Note: It is not recommended to activate Live Sync if the computer
where the PayClock database server is running uses a wireless
network connection. A PC600 series terminal running in Live Sync
mode requires a constant connection to the computer running the
database. A wireless network connection may not provide the
computer a constant connection to the network which could be
troublesome.
When the terminal's "Live Sync" option is enabled its functionality
increases. The following will be available in live sync mode:
•
Real-time punches - Punches are added to the database
automatically. No polling is needed.
•
Automatic updating - The terminal will check the software to
see if any changes have been made that requires an update.
If there were changes the terminal will automatically update
itself.
•
Real-time totals - When an employee punches the worked
hours will be calculated and displayed.
•
Audio/Text Messages - Audio / text messages can be
configured to play / display on the terminal.
•
Supervisor functions - Allow a supervisor to do the following
through the touchpad on the terminal; add employees, add
or delete punches, set or change an employee's PIN, set or
change an employee's badge number and override shift lock
outs.
How do I enable Live Sync from the PayClock
software?
•
Log into PayClock and select the Terminal Manager tab on
the ribbon bar. The Terminal Manager window will open.
24 • PayClock Desktop
Hide quick links:
Advertisement
Table of Contents
