Administrator Functions; Device Information; Network Setup - Terminal Settings - Lathem PC600 Series User Manual

Administrator Functions

The terminal has one administrator. The administrator function
allows you to review the device information, set up the network
communications, set the time / date, review an error log and reset
the terminal to the factory defaults.
To enter into administrator mode at the terminal press the Admin
button. The Enter PIN screen will display.
•
Using the numeric key pad enter the administrator PIN
number and press Enter.
•
The Administrator Main Menu screen will display.

Device Information

This menu item displays information and also allows you to check for
updates to the firmware. To check for updates:
To enter into administrator mode at the terminal press the Admin
button. The Enter PIN screen will display.
•
Using the numeric key pad enter the administrator PIN
number and press Enter.
•
The Administrator Main Menu screen will display.
•
Press Device Information. The Device Information screen
will display.
•
Press the Check for Updates button. Please be patient this
may take a few minutes.
•
When finished press the center of the screen and then press
the back  button until you have returned to the default
screen.

Network Setup - Terminal Settings

This menu allows you to manually configure the network
communication settings between the terminal and PayClock
software.
Note: When using the PayClock Desktop product these settings are
typically determined during the installation of the PayClock software
and it isn't necessary to modify the settings.
Using the PC600 Series Terminal • 35