Display Irf Topology - HPE FlexFabric 7900 series Command Reference Manual

Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# Display IRF link information.
<Sysname> display irf link
Member 1
IRF Port Interface
1 FortyGigE1/9/0/1(MDC1)
FortyGigE1/9/0/2(MDC1)
FortyGigE1/9/0/3(MDC1)
FortyGigE1/9/0/4(MDC1)
2 disable
Member 2
IRF Port Interface
1 disable
2 FortyGigE2/8/0/1(MDC2)
FortyGigE2/8/0/2(MDC2)
FortyGigE2/8/0/3(MDC2)
FortyGigE2/8/0/4(MDC2)
Table 4 Command output
Field
Member ID
IRF Port
Interface
Status

display irf topology

Use display irf topology to display IRF fabric topology information.
Syntax
display irf topology
Status
UP
UP
DOWN
ADM
--
Status
--
UP
UP
DOWN
ADM
Description
IRF member ID.
IRF port number:
•
1—IRF-port 1.
•
2—IRF-port 2.
Physical interfaces bound to the IRF port, and their respective MDCs. This
field displays disable if no physical interfaces have been bound to the IRF
port.
Link state of IRF physical interfaces:
•
UP—The link is up.
•
DOWN—The link is down.
•
ADM—The interface has been manually shut down by using the
shutdown command.
•
ABSENT—Interface module that hosts the interface is not present.
5