HPE FlexFabric 7900 series Command Reference Manual page 10

Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
verbose: Displays detailed MAD information. If you do not specify this keyword, the command only
displays whether a MAD mechanism is enabled or disabled.
Examples
# Display brief MAD information.
<Sysname> display mad
MAD ARP disabled.
MAD ND disabled.
MAD LACP enabled.
MAD BFD disabled.
# Display detailed MAD information.
<Sysname> display mad verbose
Multi-active recovery state: No
Excluded ports(user-configured):
FortyGigE2/1/0/2
FortyGigE2/1/0/3
Excluded ports(system-configured):
FortyGigE1/9/0/1
FortyGigE1/9/0/2
FortyGigE1/9/0/3
FortyGigE1/9/0/4
FortyGigE2/9/0/1
FortyGigE2/9/0/2
FortyGigE2/9/0/3
FortyGigE2/9/0/4
MAD LACP enabled interface: Bridge-Aggregation 1
MAD status
Member ID
1
2
MAD BFD enabled interface: VLAN-interface 3
MAD status
Member ID
1
2
Table 6 Command output
Field
MAD ARP disabled.
MAD ND disabled.
: Normal
Port
FortyGigE1/2/0/1
FortyGigE2/2/0/1
: Normal
MAD IP address
192.168.1.1/24
192.168.1.2/24
Description
ARP MAD is not supported in the current software version.
ND MAD is not supported in the current software version.
MAD status
Normal
Normal
Neighbor MAD status
2 Normal
1 Normal
7