Display Irf Link - HPE FlexFabric 7900 series Command Reference Manual

Syntax
display irf configuration
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# (In standalone mode.) Display the basic IRF settings of the device.
<Sysname> display irf configuration
MemberID Priority IRF-Port1
--
# (In IRF mode.) Display all members' basic IRF settings.
<Sysname> display irf configuration
MemberID NewID IRF-Port1
1 1
2 2
Table 3 Command output
Field
MemberID
Priority
NewID
IRF-Port1
IRF-Port2

display irf link

Use display irf link to display IRF link information.
Syntax
display irf link
Views
Any view
1 disable
FortyGigE1/8/0/1
FortyGigE1/8/0/2
disable
Description
Current member ID of the device.
This field displays two hyphens (--) if no member ID is assigned.
Member priority.
This field is available when the device is operating in standalone mode.
Member ID assigned to the device. This member ID takes effect at reboot.
This field is available when the device is operating in IRF mode.
Physical interfaces bound to IRF-port 1. The bindings take effect at reboot.
This field displays disable if no physical interfaces are bound to the IRF port.
Physical interfaces bound to IRF-port 2. The bindings take effect at reboot.
This field displays disable if no physical interfaces are bound to the IRF port.
IRF-Port2
disable
IRF-Port2
disable
FortyGigE2/8/0/1
FortyGigE2/8/0/2
4