Irf Member Description - HP 12500 series Command Reference Manual

mdc-admin
Parameters
member-id: Assigns an IRF member ID to the device. Value range is 1 to 4.
Usage guidelines
You must assign an IRF member ID to a device before enabling its IRF mode. The member ID takes
effect after the IRF mode is enabled. This member ID must be unique among all IRF member
devices.
To change the member ID of a device in IRF mode, use the irf member member-id renumber
new-member-id command. The new member ID takes effect at reboot.
Examples
# Assign member ID 2 to the device in standalone mode.
<Sysname> system-view
[sysname] irf member 2
Info: Member ID change will take effect after the member reboots and operates in IRF mode.
Related commands
irf member renumber

irf member description

Use irf member description to configure a description for an IRF member.
Use undo irf member description to restore the default.
Syntax
irf member member-id description text
undo irf member member-id description
Default
No description is configured for any IRF member.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
member-id: Specifies the ID of an IRF member.
text: Configures the IRF member description, a string of 1 to 127 characters.
Usage guidelines
Configure a description to identify the physical location or purpose of an IRF member for easy
maintenance.
This command is available in IRF mode. Changing the operating mode from IRF to standalone can
cause loss of the IRF member description, even if you have saved the configuration.
15