Irf Member Priority; Irf Member Renumber - HP 12500 series Command Reference Manual

Examples
# Configure a description for IRF member 1.
<Sysname> system-view
[Sysname] irf member 1 description F1Num001

irf member priority

Use irf member priority to change the priority of an IRF member.
Use undo irf member priority to restore the default.
Syntax
irf member member-id priority priority
undo irf member member-id priority
Default
IRF member priority is 1.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
member-id: Specifies an IRF member ID.
priority: Sets priority in the range of 1 to 32.
Usage guidelines
Change member priority assignment to affect the maser election result. The greater the priority
value, the higher the priority. A member with higher priority is more likely to be the master.
This command is available in IRF mode. The new priority setting takes effect at the next master
election, and does not trigger master election.
To assign an IRF priority to a device in standalone mode, use the irf priority command.
Examples
# Set the priority of IRF member 2 to 32.
<Sysname> system-view
[Sysname] irf member 2 priority 32
Related commands
irf priority

irf member renumber

Use irf member renumber to change the member ID of a device in the IRF fabric.
Use undo irf member renumber to restore the previous IRF member ID of the device.
16