Irf Link-Delay - HP 12500 series Command Reference Manual

Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
domain-id: Specifies a domain ID for the IRF fabric. The value range is 0 to 4294967295.
Usage guidelines
This command is available in IRF mode. Changing the operating mode from IRF to standalone can
cause loss of the IRF domain setting, even if you have saved the configuration.
One IRF fabric forms one IRF domain. IRF uses IRF domain IDs to uniquely identify IRF fabrics and
prevent IRF fabrics from interfering with one another.
If you use a member in one IRF fabric as the intermediate device for performing LACP MAD or ARP
MAD for another IRF fabric, assign the two IRF fabrics different domain IDs to avoid false detection
of IRF split.
Examples
# Set the IRF domain ID to 30.
<Sysname> system-view
[Sysname] irf domain 30

irf link-delay

Use irf link-delay to set a delay for the IRF ports to report a link down event.
Use undo irf link-delay to restore the default.
Syntax
irf link-delay interval
undo irf link-delay
Default
The IRF link down event report delay is 0 milliseconds.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
interval: Sets the IRF link down report delay in the range of 0 to 2000 milliseconds. If the interval is
set to 0, link down events are reported without any delay.
Usage guidelines
This command is available in IRF mode. Changing the operating mode from IRF to standalone can
cause loss of the irf link-delay setting, even if you have saved the configuration.
11