Before Each Start-Up; How To Start - Porter-Cable C7510 Instruction Manual

Cast iron oil lube stationary air compressor
Table of Contents

Advertisement

Before Each Start-Up:

1.
Place On/Auto/Off lever to "OFF".
2.
Close the globe valve.
3.
Attach hose and accessories. NOTE: A regulator MUST be installed when
using accessories rated at less than 110 PSI.
tools and accessories. The regulator outlet pressure must never exceed the
maximum pressure rating.

How to Start

1.
Turn the On/Auto/Off lever to "AUTO" and allow tank pressure to build.
Motor will stop when tank pressure reaches "cut-out" pressure.
2.
When the tank pressure reaches "cut-out" pressure open the globe valve.
IMPORTANT: When using regulator and other accessories refer to the
manufacturers instructions.
NOTE: Always operate the air compressor in well-ventilated areas free of
gasoline or other combustible vapors. If the compressor is being used to
operate a sprayer, DO NOT place compressor near the spray area.
Too much air pressure causes a hazardous risk of bursting.
Check the manufacturer's maximum pressure rating for air
15- ENG
D28176

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents