Table of Contents
Advertisement
eAN3810A
Hardware Installation Guide
Figure 1-35 Installing an eAN3810A Ethernet cable
(1) PoE port on the eAN3810A panel
Step 3 Connect the RJ45 connector at the other end of the Ethernet cable to auxiliary devices port.
----End
Follow-up Procedure
1.
2.
1.9.6 (Optional) Installing the PSE Cable
This section describes the procedure and precautions for installing the PSE cables.
Figure 1-36
Issue 01 (2017-04-30)
Route the cable, and then use a cable tie to bind the cable.
Label the installed cable.
shows the cable connections when the PSE is installed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 eAN3810A Hardware Installation Guide
(2) Ethernet cable
38
Advertisement
Table of Contents
