Table of Contents
Advertisement
eAN3810A
Hardware Installation Guide
Figure 1-20 Routing hose clamps through the Dock separate mounting bracket
Step 3 Put the Dock in the installation position, route two hose clamps through the pole and the steel
belts through the locking connectors, partially tighten the screws, and use an M6 inner
hexagon torque screwdriver to tighten the screws to 5 N·m (44.25 lbf·in.), as shown in
1-21.
Ensure that your body is close to the module when tightening hose clamps.
Issue 01 (2017-04-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 eAN3810A Hardware Installation Guide
Figure
24
Advertisement
Table of Contents
