Huawei eAN3810A Hardware Installation Manual page 20

eAN3810A
Hardware Installation Guide
Figure 1-14 Securing the eAN3810A onto the mounting kit
1.
2.
----End
1.7.2 Installing eAN3810A on a Wall
This section describes the procedure and precautions for installing an eAN3810A on a wall.
Context
The wall for installing eAN3810As must meet the following requirements:


Issue 01 (2017-04-30)
Hang the two dowels on the top of the eAN3810A attachment plate onto the mounting
kit, and push the eAN3810A until it snaps into place, as shown by illustrations a and b in
Figure 1-14.
Use the M6 inner hexagon screwdriver to tighten the screw on the top of the attachment
plate to 5 N·m (44.25 lbf·in.), as shown by illustration c in
The wall must be able to bear a weight four times heavier than the eAN3810A's weight.
Expansion bolts must be tightened to 30 N·m (265.52 lbf·in.) to ensure that the bolt
assemblies work properly and the wall remains intact.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 eAN3810A Hardware Installation Guide
Figure 1-14.
18