Huawei eAN3810A Hardware Installation Manual page 19

eAN3810A
Hardware Installation Guide
Figure 1-12 Distance between the separate mounting kit and the ground
It is recommended that the mounting kits be installed at a position 1200 mm (47.24 in.) to 1600 mm
(59.06 in.) high above the ground.
Step 2 Install the mounting kit, as shown in
Figure 1-13 Installing the eAN3810A mounting kit
1.
2.
Step 3 Secure the eAN3810A onto the separate mounting kit, as shown in
Issue 01 (2017-04-30)
Determine a position for installing the eAN3810A. Then, place the separate mounting kit
onto the pole, thread the hose clamp through the mounting kit, and encircle the pole with
the hose clamp, as shown by illustrations a, b, and c in
Use an M6 inner hexagon screwdriver to tighten the bolt on each hose clamp to 7 N·m
(61.96 lbf·in.) to secure the mounting kit, as shown by illustration d in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 eAN3810A Hardware Installation Guide
Figure 1-13.
Figure 1-13.
Figure 1-13.
Figure 1-14.
17