Huawei eAN3810A Hardware Installation Manual page 21

eAN3810A
Hardware Installation Guide


Procedure
Step 1 Determine a position for installing the eAN3810A on a wall, use a level to verify that the
marking-off template is placed horizontally, and then use a marker to mark anchor points, as
shown in
Figure 1-15 Marking anchor points
(1) Level
Step 2 Drill holes at the anchor points and install expansion bolts in the holes, as shown in
1-16.
Issue 01 (2017-04-30)
Do not stand an eAN3810A upright because the RF ports cannot support the weight of the
eAN3810A.
Place a foam pad or cardboard under an eAN3810A to protect the eAN3810A housing
from damage during the installation.
Figure 1-15.
(2) Tapped hole
It is recommended that the separate mounting kit be 1200 mm (47.24 in.) to 1600 mm (62.99 in.) above
the ground.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 eAN3810A Hardware Installation Guide
(3) Marker
Figure
19