Huawei eAN3810A Hardware Installation Manual page 18

eAN3810A
Hardware Installation Guide
Figure 1-11 Installing a micro SD card
Step 4 Cover the plate for the cabling cavity and use the screwdriver to tighten the screw.
----End
1.7 Installing the eAN3810A
This section describes the eAN3810A installation process.
1.7.1 Installing eAN3810A on a Pole
This section describes the procedure and precautions for installing an eAN3810A on a pole.
Context


Procedure
Step 1 Determine a position for installing the separate mounting kit, as shown in
Issue 01 (2017-04-30)
Do not stand an eAN3810A upright because the RF ports cannot support the weight of
the eAN3810A.
Place a foam pad or cardboard under an eAN3810A to protect the eAN3810A housing
from damage during the installation.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 eAN3810A Hardware Installation Guide
Figure 1-12.
16