Audio Configuration; Audio Connections - Omnia 11 Quick Start Installation Manual

AUdIO CONFIGURATION

AUdIO CONNECTIONs

1. Determine the inputs and outputs that are appropriate for your installation and follow the
appropriate instructions.
AUDIO INPUT - Both analog and digital input sources may be connected simultaneously,
however, only the input source that has been selected in the Input menu will be active.
D
C
a. For Analog audio, connect XLR audio cables to the left and right ANALOG INPUTS (C) jacks.
b. For Digital audio, connect XLR audio cables to the AES INPUT (D) jack.
c. For an existing Livewire system, the single Livewire Ethernet connection is all that is needed for audio I/O
(except for the composite MPX outputs). IMPORTANT: Do not connect an Ethernet cable at this time.
Input source selection will be covered later in this guide.
INsTAllATION hElP
For more details about the Omnia.11, or to download the full manual
please visit https:/ /www.telosalliance.com/Omnia/Omnia11
If you have more questions, call the Telos Alliance 24/7 Support Team at
+1 (216) 622-0247, or email us at support@telosalliance.com, we'd be
happy to help you out.