Setting Up Soundstation2W; Ready State - Polycom SoundStation 2W User And Administrator Manual

Setting up SoundStation2W™

1
Connect base station to power and analog phone line.
2
Install battery.

Ready State

SoundStation2W™ will display a
Ready message after successfully
communicating with the base upon
► For best performance, charge the console for a full charging cycle
(4 hours for BASIC, 8 hours for EX) prior to first use.
power up. The Ready message is also
shown after a call is completed and the
phone is available for the next call.
SoundStation2W™ User Guide - 7
Analog telephone
line
3
BONG!
( 312 ) 555- 1212
Ready Ready
SPDIAL P HBOOK REDIAL
Wait for phone to register to base
station.