Charging; Charging State; Low Power - Polycom SoundStation 2W User And Administrator Manual

Polycom soundstation 2w user's manual
Table of Contents

Advertisement

Charging

SoundStation2W™ operates on a
rechargeable lithium ion battery. The
battery needs to be recharged peri-
odically. Use the supplied charger
to recharge the battery while it is
installed in the console. In similar
fashion to a laptop PC or a mobile
phone, the SoundStation2W™ can
be used or continue operation while
being charged. The battery cannot be
recharged outside the console.

Charging State

The SoundStation2W™'s display will
indicate when the battery is charging
by animating the battery icon.

Low Power

The SoundStation2W™'s display will
indicate when battery charge is low. The
low battery warning will begin when the
remaining talk time is approximately
20% or less of the full charge capacity.
The warning will be triggered when a
user goes back on-hook after completing
a call. This ensures that the low power
warning is seen by a user. In addition
to a visual message on the console LCD
which will read, "Low Battery, Please
Charge," you will hear an audible beep-
ing alert.
Typical talk time and standby time are
shown here:
Charge Time
Talk Time
Standby Time
Battery icon displayed on LCD.
SoundStation2W™ User Guide - 23
2 cell battery
4 hours
12 hours
80 hours
► Optimum battery performance
may be achieved only after the
battery is conditioned. The battery
will have to go through four to five
charge and discharge cycles before
reaching optimum performance.
► Talk time is measured for natu-
ral conversation at optimum volume
levels.
4 cell battery
8 hours
24 hours
160 hours

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SoundStation 2W and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents

Save PDF