Lcd Messages - Polycom SoundStation 2W User And Administrator Manual

LCD Message Summary
The following messages are displayed on the console LCD to represent various
usage conditions.
LCD Message What it means:
Ready
Phone is in idle state and ready to make calls.
No Signal Signal strength is too weak to carry a call.
Call Ended
The call has been dropped.
Mobile Phone In
A mobile phone is plugged in to the mobile phone
jack OR a mobile phone call has been initiated.
Searching for
Attempting to contact the base station to establish
Signal a connection.
Enter Number
Enter the number you wish to dial.
Charging A charger is plugged in and battery is recharging.
Base Paging
Page button on base was pressed to locate the
console.
Battery Low
The charge in the battery has depleted. A
recharge is required to continue reliable operation
of your SoundStation2W™.
Incoming Call Phone received an incoming call.
SoundStation2W™ User Guide - 25
What you will see:
Idle screen.
Antenna icon will show zero bars.
"Call Ended" with elapsed time
indicated.
"Mobile Phone In"
"Searching for Signal"
Digits of the number you are dialing.
"Charging"
Base paging. Press any key to stop
beeping.
The remaining talk time and an
audible warning tone.
"Incoming Call"