Using Soundstation2W; Placing A Call; Answering A Call; Answering A Second Call - Polycom SoundStation 2W User And Administrator Manual

Using SoundStation2W™

► For best performance, charge the console for a full charging cycle
(4 hours for BASIC, 8 hours for EX) prior to first use.

Placing a Call

SoundStation2W™ allows you to place a call over an
analog line or through an analog terminal adapter (ATA).
Several methods are available to initiate a call.
Direct Dial
1. To obtain dial tone, press the
2. Dial the desired number.
► To cancel the call, press the
key.
OR

Answering a Call

Press the
answer an incoming call. Pressing the
button will override all other tele-
phone activities. The three LEDs will
blink green when the phone rings.

Answering a Second Call

If you are on a call when another call
is received, you will hear a tone if your
phone system is setup to support Call
Waiting.
► Press the Conference button
to answer the incoming call.
This first call will be automati-
cally placed on hold.
key.
key or any number key to
SoundStation2W™ User Guide - 12
Indirect Dial
1. From the Ready screen, dial the
desired number.
2. Press the
soft key to make the call.
► If you make a mistake entering
the telephone number, press the
soft key.
<DEL
► Press the
CANCEL
cel the call.
► Switch back and forth between
calls using the conference button
.
key or the
SEND
soft key to can-
SEND
OR