Stopping The Engine; Emergency Starting - Mercury 2.5 TwoStroke Operation, Maintenance & Installation Manual

Stopping The Engine

Reduce engine speed and push in the stop switch or pull the lanyard.

Emergency Starting

If the starter rope should break or the rewind starter fails, use the spare starter
rope (provided) and follow this procedure.
The neutral‑speed‑protection device is inoperative when starting the engine
with the emergency starter rope. Set the engine speed at idle and the gear
shift in neutral to prevent the outboard from starting in gear.
1. Side shift models ‑ Shift outboard to neutral position.
2. Remove three bolts and rewind starter assembly.
3. Reinstall the rear rewind starter mounting bolt into the fuel tank.
IMPORTANT: The black lead from the engine stop switch will have to be
reconnected in order to use the engine stop switch to stop the engine.
OPERATION
STOP
28401
WARNING
!
28402
28
eng