JVC KW-NT1J Service Manual page 22

4.9 Error code tables
4.9.1 Mechanism error code
Error contents
Disc loading error
(3) D1 time out
Eject error
(3) B1 time out
(4) C1 time out
Error in loading wait
4.9.2 Disc error code
Error contents
TOC read error
First track access error
Last track access error
T1 access error
T12 access error
T24 access error
Read-in area read error
DVD L1 layer adjustment
error
DVD L0 layer adjustment
error
NO DISC judgment
It is NO DISC by start failure Start is impossible
It is stopped by playback in-
ability.
Logic format NG
Seek access error
1-22 (No.MA453<Rev.003>)
Details
Loading of a running mode
Disc was pulled out in a wait.
TOC lead movement of a CD is not completed.
Even if TOC reading passes after the end with CD running mode for 30 seconds,
the first track access is not finished.
Even if first track passes after the end with CD running mode for 30 seconds, the
last track access is not finished.
Even if T1 access passes in a DVD running mode for 30 seconds, it is not finished.
Even if T12 access passes in a DVD running mode for 30 seconds, it is not fin-
ished.
Even if T24 access passes in a DVD running mode for 30 seconds, it is not fin-
ished.
Read-in area read operation of DVD is not completed.
Adjustment of L1 layer of DVD is not finished normally. (including focus jump fail-
ure)
Adjustment of L0 layer of DVD is not finished normally. (including focus jump fail-
ure)
Judgment without disc
Stop in running mode playback
Logic format analysis inability or non-correspondence logic format
It cannot arrive at an aim address even if it passes for 15 seconds.
Detailed
Error code
error code
09 0013
01 0023
01 0024
09 0031
Details
Detailed
Error
error
code
code
84 0059
80 0060
80 0061
80 0069
80 0070
80 0071
84 0072
80 0074
80 0075
80 0090
80 0091
80 0093
80 0094
80 0095