3.1.14 Removing the Panel board (See Fig.19)
(1) Disconnect the FPC from LCD module connected to con-
nector CN911,
CN941
(2) Disconnect the card wire from Jack board connected to
connector
CN971
of the Panel board.
(3) Disconnect the connector wire from BT antenna board con-
nected to BT module.
(4) Remove the five screws T attaching the Panel board.
CN911
T
CN941
3.1.15 Removing the Jack board (See Fig.20)
(1) Remove the two screws U attaching the Jack board.
and
CN951
of the Panel board.
CN971
T
T
Connector wire
CN951
Fig.19
Fig.20
U
(No.MA453<Rev.003>)1-13