Table of Contents
Advertisement
.
System x X6 Power Cords
The power supplies in the X6 system have C14 receptacles as seen in the picture
below. This means the power cable used for the PSUs will need to have C13 plugs for
the server side. One power cord is required for each PSU that is installed in the X6
server.
System x x3850 X6 and x3950 X6 Worldwide PDU Power Cords
The power cords in the following table are used worldwide to connect the x3850 X6
and x3950 X6 System PSUs to PDUs when ordered as part of a System x order.
Option
FC
Description
P/N
39Y7937
6201 1.5m, 10A/100-250V, C13 to IEC 320-C14 Rack Power Cable
-
6311 2.8m, 10A/100-250V, C13 to IEC 320-C14 Rack Power Cable
39Y7938
6204 2.8m, 10A/100-250V, C13 to IEC 320-C20 Rack Power Cable
39Y7932
6263 4.3m, 10A/100-250V, C13 to IEC 320-C14 Rack Power Cable
47C2487 A3SS 1.2m, 10A/100-250V, 2 Short C13s to Short C14 Rack Power Cable
47C2488
A3ST 2.5m, 10A/100-250V, 2 Long C13s to Short C14 Rack Power Cable
47C2489 A3SU 2.8m, 10A/100-250V, 2 Short C13s to Long C14 Rack Power Cable
47C2490
A3SV 4.1m, 10A/100-250V, 2 Long C13s to Long C14 Rack Power Cable
47C2491 A3SW 1.2m, 16A/100-250V, 2 Short C13s to Short C20 Rack Power Cable
47C2492
A3SX 2.5m, 16A/100-250V, 2 Long C13s to Short C20 Rack Power Cable
47C2493
A3SY 2.8m, 16A/100-250V, 2 Short C13s to Long C20 Rack Power Cable
47C2494
A3SZ 4.1m, 16A/100-250V, 2 Long C13s to Long C20 Rack Power Cable
Y cables are also available. These cables connect to 2 PSUs in the server. Y cables
may only be used with the 900W PSUs. They are not intended to work with the 1400W
or 750W PSUs.
31
Advertisement
Table of Contents
