Product Description - PowerBox Systems GPS II Instruction Manual

Dear customer,
we are delighted that you have decided to purchase the GPS ll from our range. We
hope you have many hours of pleasure and great success with your new GPS ll.

1. PRODUCT DESCRIPTION

The GPS sensor was originally introduced to provide a means of speed-depen-
dent gain adjustment for our iGyro, but the GPS II is an entirely new development,
and can now be used with all current telemetry systems.
This latest generation of GPS receivers is extremely agile, and capable of measu-
ring speed even when there are rapid changes in speed or direction. The radial he-
lical aerial provides outstanding reception in any flight attitude, while the supple-
mentary pre-amplifier improves reliability of reception under difficult conditions.
The GPS II module is a very compact unit which virtually any model can accom-
modate. The integral LED provides information about receiver status.
It is possible to set up alarms, addresses and other parameters using the Pow-
erBox USB interface and the free PowerBox Terminal program; the actual faci-
lities vary according to the telemetry system in use. However, the USB interface
function can also be carried out by the USB adapters made by Jeti or Multiplex.
Software updates can be loaded using the USB adapter, so there is nothing to
prevent future expansion.
2 PowerBox-Systems − World Leaders in RC Power Supply Systems