Advertisement
Introducing the Single-Serial PC Card
The Single-Serial PC Card adds one high-speed serial port (RS232)
into your notebook computer to connect various types of serial
devices.
Keys Features and Benefits
• Works with notebook computers with one Type II/III PC
Card/CardBus slot
• Fast 16550 UART supports baud rates up to 115.2Kbps
• Built-in 16-byte FIFO buffer to speed up data transfer
• Provides one RJ45-to-serial (DB9) removable cable for device
connections
• Works with various types of RS232 serial devices including
modems, PDAs, label printers, bar code scanners, digital
cameras, and more
System Requirements
• Pentium or equivalent notebook computer with an available
CardBus slot
• Windows 98/98SE/ME/2000/XP
Package Contents
• One Single-Serial PC Card
• RJ45 to 9-pin serial port cable
• Driver diskette
• This quick installation guide
04-0254A
Single-Serial PC Card
Quick Installation Guide
1
Advertisement
Table of Contents
Related Manuals for SIIG IO1037
Summary of Contents for SIIG IO1037
- Page 1 Single-Serial PC Card Quick Installation Guide Introducing the Single-Serial PC Card The Single-Serial PC Card adds one high-speed serial port (RS232) into your notebook computer to connect various types of serial devices. Keys Features and Benefits • Works with notebook computers with one Type II/III PC Card/CardBus slot •...
-
Page 2: Hardware Installation
Hardware Installation General instructions for installing the card are provided below, since the design of notebook computers may vary. Refer to your system’s reference manual for further information, if needed. 1. Power off your notebook computer and any other connected peripheral devices. - Page 3 Windows 98/98SE Driver Installation 1. At the Add New Hardware Wizard click Next. 2. Select Search for the best driver for your device (Recommended), click Next. 3. Insert the driver diskette. Choose Floppy disk drives, uncheck the other boxes, then click Next. 4.
- Page 4 To verify successful driver installation: 1. Check Device Manager to verify successful driver installation. Windows 98/98SE/ME: From the main desktop, right click My Computer, then click Properties. Click Device Manager tab. Windows 2000/XP: Right click My Computer, then click Manage. Click Device Manager. 2.
-
Page 5: Technical Support
If your product fails to be in good working order during the warranty period, you may return it to SIIG for repair or replacement at SIIG's option. To return the product, you need to follow these steps:... -
Page 6: Product Name
Fremont, CA 94538-3152 Single-Serial PC Card is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation. Other names used in publication are for identification only and may be trademarks of their respective companies.