Specifications - Makita BO5041 Instruction Manual

ENGLISH (Original instructions)
1-1. Lock button
1-2. Switch trigger
2-1. Speed adjusting dial
4-1. Screw
4-2. Front grip
5-1. Grip base
5-2. Makita logo
8-1. Dust bag
9-1. Dust nozzle

SPECIFICATIONS

Orbits per minute (min
Dimensions (L x W x H)
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sanding of large surface of wood,
plastic and metal materials as well as painted surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted
according to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : sanding metal plate
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test method
and may be used for comparing one tool with another.
Explanation of general view
10-1. Dust nozzle
11-1. Groove
11-2. Front fixing cardboard
11-3. Front side of paper dust bag
12-1. Claws
12-2. Upper part
13-1. Notch
13-2. Guide
15-1. Holding tab
Model
Paper size
-1
)
Net weight
Safety class
noise level determined
) : 81 dB (A)
pA
) : 92 dB (A)
WA
value (tri-axial vector
2
) : 3.5 m/s
h
2
BO5040
125 mm
12,000
218 mm x 123 mm x 153 mm
1.4 kg
ENE052-1
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
ENF002-2
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
ENG905-1
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Random Orbit Sander
ENG900-1
Model No./ Type: BO5040,BO5041
sum)
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is
ENG901-1
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
4
16-1. Dust box
16-2. Dust nozzle
17-1. Latch
17-2. Dust nozzle
20-1. Sponge pad
21-1. Felt pad
22-1. Wool bonnet
218 mm x 123 mm x 153 mm
/II
BO5041
125 mm
4,000 - 12,000
1.4 kg
/II
ENH101-18