Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Maple Systems Manuals
  4. Controller
  5. Graphic HMIs
  6. Information sheet

Maple Systems Graphic HMIs Information Sheet

Siemens s7-200 smart (ppi)
Hide thumbs
1
2
3
4

Advertisement

Quick Links

Download this manual
CONTROLLER INFORMATION SHEET
Maple Model(s)
Graphic HMIs
P/N: 1036-0203
Rev. 01
Date: 10/11/2015
Summary
Maple Systems Graphic HMIs
When configured with EZware, the Graphic HMI is the master in a point-to-point single
master, single slave format. Please refer to the Installation and Operations Manual for
information on connecting multiple Graphic HMIs to a single PLC port.
Communications Cable
The Graphic HMI should be connected to the controller's PPI
cables offered by Maple Systems as well as cable assembly instructions to assist you in
assembling your own communications cable are available on our website at
www.maplesystems.com.
WARNING If your communications cable is not wired exactly as shown in our cable
assembly instructions, damage to the HMI or loss of communications can
result.
PLC Controller Settings
The PLC station number cannot be the same as the HMI station number.
Maple Systems Inc., 808 134th Street SW, Suite 120, Everett, WA 98204-7333 – www.maplesystems.com
.
1036-0203
PLC or Controller
Siemens S7-200 SMART (PPI)
communicate with Siemens S7-200 SMART modules via PPI.
Page 1 of 4
port.
A list of communications
Rev. 01, 10/11/2015

Advertisement

loading
Need help?

Need help?

Do you have a question about the Graphic HMIs and is the answer not in the manual?

Questions and answers

Related Manuals for Maple Systems Graphic HMIs

Summary of Contents for Maple Systems Graphic HMIs

  • Page 1 The Graphic HMI should be connected to the controller’s PPI port. A list of communications cables offered by Maple Systems as well as cable assembly instructions to assist you in assembling your own communications cable are available on our website at www.maplesystems.com.
  • Page 2 Accessible PLC Memory Register Memory The following table lists the PLC’s register memory ranges that the Graphic HMIs are able to access. Please note that your PLC’s memory range may be smaller or larger than that supported by these HMIs. The following register memory can be displayed in 16-bit or 32-bit format on the Maple HMI.
  • Page 3 1 or 2 Must match the PPI port setting. Even, Odd, Settings: Parity: Even Must match the PPI port setting. None Maple Systems Inc., 808 134th Street SW, Suite 120, Everett, WA 98204-7333 1036-0203 Page 3 of 4 Rev. 01, 10/11/2015...
  • Page 4 Recommended Name Options Important Notes Settings Adjust if longer timeout is Settings: Timeout 0.1 to 25.5 required. (sec) Timeout period between HMI Settings: Turn around 0-1000 polls. delay (ms): Settings: Send Ack Delay : Settings: Reserved 1: Not Applicable Settings: Reserved 2: Not Applicable Settings: Reserved 3: Not Applicable...