Husqvarna DXR250 Operator's Manual page 42

EXTERNAL TOOL
SERVICE
The machine can be used as a power source to operate external hydraulic tools.
The value for oil pressure and oil flow can be adjusted from port A to B. Select which setting you would like to change
with the selection keys. Use the arrow keys to change the value.
OIL REFIL
SERVICE
The oil level is read through the level sight glass on the hydraulic tank. Top up with oil if the level is more than 0.5 in below
the maximum mark when all cylinders are retracted.
Hold the selection key down to refill oil.
Use the sight gauge to check the oil level when refilling.
TRACK TENSION
SERVICE
Hold the selection key down to activate the track tension.
LCD ADJUSTMENT
SERVICE
Use the arrows up and down to adjust the display's contrast and brightness.
WORKING LIGHT
SERVICE
Activates/shuts off the work lighting. Press the selection key to switch to another mode.
42 – English
SETTINGS
EXTERNAL TOOL
Activate
ON/OFF
Adjust
Back
OIL REFIL
Activate
ON/OFF
Hold down
to activate
Back
TRACK TENSION
Activate
ON/OFF
Hold down
to activate
Back
LCD ADJUSTMENT
ON/OFF
WORKING LIGHT
EXTERNAL TOOL
Pressure: 140 bar
Flow: 40 l/min
xx °C xx bar
OIL REFIL
TRACK TENSION
EXTERNAL TOOL
Oil pressure :
140 bar (30...250 bar)
40 l/min (5...65 l/min)
Back
xx °C
Oil flow :
xx bar