Husqvarna DXR250 Operator's Manual page 39

Steel shear (others)
WORK
Select this when you want to work with steel shear, grapple or adjustable tools. Press the selection key to confirm the
choice.
Steel Shear
WORK
Select this when you want to work with a steel shear. Press the selection key to confirm the choice.
Extra1 will be activated automatically for the rotor function when steel shears are selected.
Grapple
WORK
Select this when you want to work with a grapple. Press the selection key to confirm the choice.
Extra1 will be activated automatically for the rotor function when grippers are selected.
Drum Cutter
WORK
Select this when you want to work with a drum cutter. Press the selection key to confirm the choice.
Adjustable
WORK
Select this when you want to work with a tool that is not a standard tool.
The value for oil pressure and oil flow can be adjusted from port A to B. Select which setting you would like to change
with the selection keys. Use the arrow keys to change the value.
The oil direction can either be one-way – with or without grease (e.g. when working with a breaker) or two-way – with or
without grease (e.g. when working with a crusher). Press the selection key to switch to another mode.
SETTINGS
STEEL SHEAR
(OTHERS)
STEEL SHEAR
STEEL SHEAR
(OTHERS)
STEEL SHEAR
GRAPPLE
(OTHERS)
STEEL SHEAR
DRUM CUTTER
(OTHERS)
STEEL SHEAR
(OTHERS)
ADJUSTABLE 3
Adjustable Tool 3
Oil press. A-B: 150bar
Oil flow A-B: 65l/min
(30...250bar)
Adjustable Tool 3
Oil press. B-A: 150bar
Oil flow B-A: 65l/min
(30...250bar)
1(4)
Adjustable Tool 3
(5...50l/min)
Adjustable Tool 3
(5...50l/min)
Adjustable Tool 3
Oil direction B->A
No grease
English – 39