Husqvarna DXR250 Operator's Manual page 68

Communication error
Message on the display
No secondary control module found in
machine. Please check control modules
and CAN connection in machine.
Machine type not selected. Enter machine
type menu and selectmachine type for the
current machine
Selected machine type not supported by
terminal. This may affect machine type
specific functions
Communication error. Machine type could
not be uploaded to terminal. Please restart
terminal.
Communication error. List of available
machine types could not be uploaded to
terminal. Please try again
Communication error. Machine type may
not have been selected correctly in
machine. Machine type disabled in
terminal. Please make selection again.
Communication error. No new machine
type has been downloaded to machine.
Please make machine type selection again.
Communication error. Parameter could not
be updated from machine. Please try again.
Communication error. Parameter may not
have been correctly downloaded to
machine. Please try changing parameter
again.
Communication error. Warning information
could not be uploaded from machine.
Communication error. Conflicting warning
information. Please restart machine.
Communication error. Terminal incapable of
uploading warning information. Please
restart terminal and machine.
68 – English
TROUBLESHOOTING
Indication on
the machine
No indication on
machine.
No indication on
machine.
Effect on
machine Cause
functions
The PLC
module do not
find any slave
module to
communicate
with.
Kommunikation
sproblem
mellan
mastermodulen
och terminalen
terminal.
Possible action
Restart the
machine. Check
supply and CAN
cables to the
slave module.
Restart the
machine and
the terminal.