To Fit Leg Base Mouldings - Childcare Pod Timber Natural Instructions Manual

ASSEMBLY / OPERATING INSTRUCTIONS

To fit Leg Base Mouldings...

Locate the two rear upper legs.
1a.
1
Line up the screw and the hole and turn clockwise
1b.
until the leg is firm.
Do not over-tighten.
1c.
Repeat for opposite side.
1d.
2a. The chair should resemble the image as shown.
2
3a. Locate the four bottom legs.
3
3b. Line up the screw and the hole and turn clockwise
until the leg is firm.
3c. Do not over-tighten.
Repeat for remaining three legs.
3d.
4a. Rotate the feet located at the end of the bottom legs.
4
4b. Ensure the feet are rotated to sit flush to the surface
before use of the high chair.