Download Print this page

Installation - Electrolux EQTP4520IK Manual

Teppan yaki grill plate
Hide thumbs


and a number come on. There is an error in the hob. Disconnect the hob from
comes on.
comes on.
comes on.
7.2 If you cannot find a
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Give also three
digit letter code for the glass ceramic (it is
in the corner of the glass surface) and an


Refer to Safety chapters.
Possible cause
The electrical connection is
incorrect. The supply volt-
age is out of range.
There is an error in the hob
because a cookware boiled
dry. Automatic Switch Off
and the overheating protec-
tion for the zones operate.
The cooling fan is blocked.
error message that comes on. Make sure,
you operated the hob correctly. If not the
servicing by a service technician or dealer
will not be free of charge, also during the
warranty period. The instructions about
the Service Centre and conditions of
guarantee are in the guarantee booklet.
8.1 Before the installation
Before you install the hob, write down the
information bellow from the rating plate.
The rating plate is on the bottom of the
Serial number ...........................
the electrical supply for
some time. Disconnect the
fuse from the electrical sys-
tem of the house. Connect
it again. If
comes on
again, speak to an Author-
ised Service Centre.
Speak to a qualified electri-
cian to check the installa-
Deactivate the hob. Re-
move the hot cookware. Af-
ter approximately 30 sec-
onds, activate the zone
again. If the cookware was
the problem, the error mes-
sage goes out. Residual
heat indicator can stay on.
Let the cookware become
sufficiently cool. Check if
your cookware is compati-
ble with the hob.
Refer to "Hints and tips"
Check if objects block the
cooling fan. If
on again, speak to an Au-
thorised Service Centre.



  Also See for Electrolux EQTP4520IK

  Related Manuals for Electrolux EQTP4520IK