Table of Contents
Advertisement
NOTE:
•
A pop up will appear asking you to accept a request for permission to connect to
your messages. Select "Don't ask again" and press OK. A pop up will appear asking
you to accept a request for permission to connect to your messages. Select "Don't
ask again" and press OK.
•
All incoming text messages received during the current ignition cycle will be deleted
from the Uconnect system when the ignition is turned to the Off position.
Voice Text Reply (Not Compatible With iPhone)
NOTE:
Voice texting reply and voice texting features require a compatible mobile device enabled
with Bluetooth Message Access Profile (MAP). iPhone, and some other smartphones, may
not entirely support Bluetooth MAP.Visit UconnectPhone.com for the latest system and
device compatibility.
•
On some mobile phones, to make the SMS voice reading function available, the SMS
notification option on phone must be enabled. This option is usually in the Bluetooth
connections menu for a device registered as "Uconnect." After enabling this function
on the device, it must be disconnected and reconnected with the Uconnect system in
order to make it effective
•
Due to the extremely large number of mobile phone manufacturers, your mobile de-
vice may not be listed. For further assistance, contact Uconnect Customer Care @
1-877-855-8400 for U.S. residents or, 1-800-465-2001 (English) / 1-800-387-9983
(French) for Canadian residents.
Once your Uconnect system is paired with a compatible mobile device, the system can
announce a new incoming text message, and read it to your over the vehicle audio sys-
tem.You can reply to the message using Voice Recognition by selecting, or saying, one of
the 18 pre-defined messages.
ELECTRONICS
Enable Android Device Incoming Text
Messages
89
Advertisement
Table of Contents
